HP P Class 733/800/866MHz / 1GHz, User Manual

Page: 46 / 158

30 Chapter 2
How to Install Accessories In Your HP Visualize Linux Workstation
Installing Memory
4. Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the Workstation’s case.
5. Remove the transparent airflow guide covering the processor sockets
(if needed).
6. Remove the floppy disk drive data cable from the system board.
7. The location of the memory module slots is shown here.
8. Slide the memory module into the slot at 90˚ to the system board
(with the cutouts furthest away from the processor).
Push the module until
the retaining clips click
into position
Memory module
cutouts
Slide the memory module
into the slot at 90˚ to the
system board