HP P Class 733/800/866MHz / 1GHz, User Manual

Page: 50 / 158

34 Chapter 2
How to Install Accessories In Your HP Visualize Linux Workstation
Installing Mass Storage Devices
Which Power
Connectors to Use There are two different types of power connectors—these are shown
below.
Some of the power connectors will already be connected to devices. If you
install a device that requires a different connector, the connector
converter should be supplied with the device.
Installing a Hard
Disk Drive This Workstation has integrated Dual Ultra ATA-33 IDE controllers and,
on selected models, an Ultra SCSI interface board.
• The Dual Ultra ATA-33 IDE controllers, on the PCI bus, support up to
four fast (33 MB per second) IDE devices.
• On selected models, the Ultra SCSI 16-bit interface board, installed
in a PCI slot, supports up to 13 external SCSI devices and
automatically switches to non-Ultra or standard mode.
Before Installing
an
IDE Hard Disk Refer to the drive’s installation guide to see if you must set jumpers or if
there is a special installation procedure to follow.
Power Cables for Hard Disk
Drives, Zip Drives, Tape Drives,
CD-RW, and CD-ROM Drives
Power Cable for 3.5-inch
Flexible Disk Drive