manualshive.com logo in svg

HP OmniBook 800, Evaluator Manual

Share
Download
HP OmniBook 800 Evaluator Manual Download Page 98

Using OS/2 Warp 4.0

Installing OS/2 Warp 4.0

6-8

 13. Open the OS/2 System folder, then System Setup, then double-click on System.

 14. Select OmniBook 800CT 800x600 65,536 Colors, then click OK

 15. Shut down, then reboot.

 16. See “Changing Screen Resolution” in the 

OS/2 User’s Guide

 for more

information.

Important

Use SETUP.CMD for the 

first

 installation of these video device drivers;

thereafter, to change video resolutions, repeat from step 16.

To install sound support

Requirements

♦ 

OmniBook 800 with OS/2 Warp 4.0 Installed.

♦ 

HP OmniBook drivers for sound support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\OS2\SOUND.

 1. Insert the OmniBook 800 OS/2 Drivers disk.

 2. Open an OS/2 Command Prompt.

 3. Go to A:\.

 4. Type EINSTALL 1887.

 5. From the IBM Multimedia Presentation Manager/2 - Installation Windows, Select

ES1887 WinOS2/Windows Audio if you installed OS/2 WinOS2 support and
click Install.

 6. Click Yes to Change the CONFIG.SYS

 7. Click OK to Specify 1 AudioDrive ES1887.

 8. Set the following values and click OK.

I/O Address

220

DMA Channel

1

DMA 2

5

Interrupt Level

5

DMA Transfer Mode

4

Summary of Contents for OmniBook 800






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands