manualshive.com logo in svg

HP OmniBook 800, Evaluator Manual

Share
Download
HP OmniBook 800 Evaluator Manual Download Page 79

Using Windows NT 4.0

Installing Windows NT 4.0

5-7

To install mouse support

Requirements

♦ 

OmniBook 800 with Microsoft Windows NT 4.0 installed.

♦ 

OmniBook 800 drivers for mouse support.
Location: OmniBook hard drive or on the Recovery CD in
\OMNIBOOK\DRIVERS\NT\MOUSE.

 1. Create a directory on the C: drive called \MOUSE

 2. Copy the files in the mouse driver directory to C:\MOUSE.

 3. Run SETUPAMC.EXE in C:\MOUSE.

 4. Shut down and restart Windows NT to activate the mouse driver.

To install PC card support

Requirements

♦ 

OmniBook 800 with Windows NT 4.0 installed.

♦ 

OmniBook 800 drivers for PC card support.
Location: OmniBook hard drive and on the Recovery CD in
\OMNIBOOK\DRIVERS\NT\PCMCIA.FIX.

 1. From the Start menu, click Programs, then click Windows NT Explorer.

 2. From the View menu, click Options.

 3. Click Show all files, then click OK.

 4. Locate PCMCIA.SYS in the following directory:

 C:\ <current WinNT dir>\system32\driver.

 5. Rename the file to PCMCIA.OLD.

 6. Copy the HP provided PCMCIA.SYS from the directory of the PC card driver to

 C:\<current WinNT dir>\system32\driver directory.

 7. Shut down and restart Windows NT to activate the PC card driver.

Summary of Contents for OmniBook 800






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands