HP OmniBook 800 Page 84 Evaluator Manual Download

Page: 84 / 149

Using Windows NT 4.0

Installing Cards

5-12

7. Select the Protocols to install, then click Next.

8. Click Next to install the default Windows NT networking services.

9. Click Next to install the networking components.

10. Enter the directory of the Windows NT install files, then click Continue. (If you

installed from CD-ROM, they are in D:\I386\.) You will need to enter this twice.

11. Enter the settings listed above in the Xircom CreditCard Ethernet IIps Setup

v1.35 window, then click Continue.

12. If you installed the TCP/IP protocol you will be asked if you wish to use DHCP.

Select the appropriate choice for your network.

13. If you chose not to use DHCP you will be prompted to enter your TCP/IP

information.

14. Click Next to choose the default network bindings.

15. Click Next to start the network.

16. Select whether you are connecting to a workgroup or a domain and enter the

appropriate name for your network.

17. Click Finish, then click Yes to restart your computer.

To install a 3Com EtherLink III LAN+33.6 Modem PC card

Requirements

♦

OmniBook 800 with Windows NT 4.0 installed.

♦

Windows NT CD-ROM.

♦

3Com EtherLink III LAN+33.6 Modem PC card.

♦

3Com 3C562 driver disk version 5.6.

Configuration

♦

I/O Port Address: 0x300.

♦

Memory Address: 0xD2000.

♦

Network Interrupt: 3.

♦

Media Type: <Your Network Info>.

♦

LANOnly Mode: Disabled.

Summary of Contents for OmniBook 800






















































































































































Search results

Summary of Contents for OmniBook 800

Reviews:

Related manuals for OmniBook 800

Brands by name

Popular brands

HP OmniBook 800, Evaluator Manual

Search results

Summary of Contents for OmniBook 800

Reviews:

Related manuals for OmniBook 800

Brands by name

Popular brands