HP OmniBook 800 Page 83 Evaluator Manual Download

Page: 83 / 149

Using Windows NT 4.0

Installing Cards

5-11

Installing Cards

This section describes how to install the following:

♦

Xircom Ethernet IIps PC card.

♦

3Com 3C562 EtherLink III LAN+33.6 Modem PC card.

♦

Intel EtherExpress PRO/100B PCI LAN adapter.

To install a Xircom Ethernet IIps PC card

Requirements

♦

OmniBook 800 with Windows NT 4.0 installed.

♦

Xircom Ethernet IIps PC card.

♦

Windows NT 4.0 CD-ROM.

Configuration

♦

I/O Port: 0x300.

♦

Memory Address: 0xD4000.

♦

Interrupt: 11.

♦

Mode: I/O Mode.

♦

Cable Type: Auto Detect.

This procedure assumes that Windows NT Networking has not been installed.

1. Insert the PC card and restart Windows NT 4.0.

2. From Control Panel, double-click Network.

3. Click Yes to begin the Windows NT Network Installation.

4. Check Wired to network, then click Next.

5. Click Select from list, select the Xircom CreditCard Ethernet IIps, then click OK.

6. Click Next to accept the Xircom CreditCard Ethernet IIps.

Summary of Contents for OmniBook 800






















































































































































Search results

Summary of Contents for OmniBook 800

Reviews:

Related manuals for OmniBook 800

Brands by name

Popular brands

HP OmniBook 800, Evaluator Manual

Search results

Summary of Contents for OmniBook 800

Reviews:

Related manuals for OmniBook 800

Brands by name

Popular brands