manualshive.com logo in svg

HP OmniBook 800, Evaluator Manual

Share
Download
HP OmniBook 800 Evaluator Manual Download Page 137

Features and Support Services

Getting Assistance and Support

8-21

To contact Customer Support

The HP Customer Support Centers will assist you free of charge during the term of
the product warranty. (You are responsible for the telephone charges.) During the
warranty period, HP can help you with the following:

HP can answer questions about

HP cannot answer questions about

Applications and operating systems included with
the OmniBook 800.
HP-described operation environments and
conditions.
HP accessories and HP upgrades.
Basic operation and troubleshooting for repair
qualification.

Non-HP hardware, software, operating systems or
usage not intended for or included (by HP) with the
product.
How to repair the product yourself.
Product development, custom installations,
consulting (contact HP about consulting
arrangements).

US/Canada (English)

(970) 635-1000

Canada (French) Montreal

(800)361-9790

Asia Pacific

 Taiwan

886.2.717.9609 

∗

 Singapore

65.290.6373 

∗

 Korea

82.2.3270.0700 

∗

 Australia

13.13.47 

∗

 New Zealand

0800.651.651 

∗

 China

86.10.505.3888 

∗

 Japan

81.3.3335.8338 

∗

Europe

 Austria (German)

0660.6386

 Belgium (Dutch)

02.626.8806

 Belgium (French)

02.626.8807

 Denmark (Danish or Swedish)

3929.4099

 Finland (Swedish or English)

0203.47.288

 France (French)

04.50.43.9853

 Germany (German)

0180.52.58.143

                                                       

∗

 If not available, contact an HP authorized support provider or HP Service Center.

Summary of Contents for OmniBook 800






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands