manualshive.com logo in svg

HP OmniBook 800, Evaluator Manual

Share
Download
HP OmniBook 800 Evaluator Manual Download Page 62

Using Windows NT 3.51

Installing Windows NT 3.51

4-6

 8. Click OK to confirm that the driver was successfully installed.

 9. Click OK to accept that the driver could not be started dynamically.

 10. Remove any floppy disks, then click Restart Now.

 11. When Windows reports that a new graphics driver has been installed, click OK.

 12. Select the appropriate desktop area and colors, then click Test.

 The OmniBook 800CT is capable of 800x600 65,536 colors.

 13. If the graphic is correctly listed, click Yes; otherwise click No and change the

setting.

 14. Click Restart Now to activate the new settings.

To install sound support

Requirements

♦ 

OmniBook 800 with Windows NT 3.51 installed.

♦ 

OmniBook 800 driver for sound support
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\NT\SOUND\NT351.

 1. From Control Panel, click Drivers.

 2. Click Add.

 3. Click Unlisted Or Updated Driver, then click OK.

 4. Enter the directory of the sound drivers, then click OK.

 5. Select the ES1887 AudioDrive 1.06.06, then click OK.

 6. Click New to install the new midimap.cfg driver.

 7. Click Continue to accept IO Address 220.

 8. If you have not changed the default sound settings in the System Configuration

Utility, enter the following settings, then click OK.

Capture DMA:

1

Capture IRQ:

5

MPU401 I/O Address:

330

Playback DMA:

5

Summary of Contents for OmniBook 800






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands