HP OmniBook 6100 Manual Download Page 88

Page: 88 / 225

Add-On Devices

Connecting External Devices

Corporate Evaluator’s Guide

2. Push down firmly on both sides of the tray until it snaps into place.

To remove a tray from the dock, pull the latch (at the center front of the dock) towards
you until the tray pops free.

Docking the computer

The computer can be on, suspended, or off when docking.

1. Connect power to the dock—the type of connection depends on the dock. See the

manual that came with the dock.

2. Place the computer on the dock platform, with the rear of the computer facing the

dock’s docking connector.

Make sure the computer’s PC Card eject buttons are in

Summary of Contents for OmniBook 6100


































































































































































































































Search results

Summary of Contents for OmniBook 6100

Reviews:

Related manuals for OmniBook 6100

Brands by name

Popular brands

HP OmniBook 6100, Manual

Search results

Summary of Contents for OmniBook 6100

Reviews:

Related manuals for OmniBook 6100

Brands by name

Popular brands