manualshive.com logo in svg

HP OmniBook 6100, Manual

The HP OmniBook 6100 is a versatile laptop that provides reliable performance for both personal and professional use. For detailed information on using this device effectively, users can access the user manual, available for download, completely free from manualshive.com.

Share
Download
background image

Reference Information 

Hardware Specifications 

196 

Corporate Evaluator’s Guide 

Hardware Specifications 

Because we are constantly improving our products, the specifications shown below are 
subject to change. For the latest specifications, see the HP Notebook Web site 
(www.hp.com/notebooks). 

Physical Attributes 

Size (14-inch display): 315 × 261 × 32 mm (12.4 × 10.3 × 1.3 in). 
Size (15-inch display): 325 × 261 × 34 mm (12.8 × 10.3 × 1.4 in). 
Weight: 2.3–2.8 kg (5.1–6.2 lb), depending on configuration. 
Magnesium display cover. 

Processor and 
Bus Architecture 

933- to 1133-MHz Intel Mobile Pentium III-M processor with Intel Speed Step 
technology or 733- to 866-MHz Celeron processor. 
Integrated 32-KB (16-KB instruction, 16-KB data) L1 cache and 512-KB (Pentium 
models) or 128-KB (Celeron models) four-way set-associative L2 cache. 
1.4-V core low-power processor with 133-MHz processor system bus. 
Core logic interfaces processor, system memory, graphics subsystem, 33-MHz 
system PCI bus, and other I/O. 

Graphics 

14.1-inch XGA (1024 × 768) or 15.0-inch SXGA+ (1400 × 1050) active-matrix (TFT) 
LCD display. 
External monitors up to 1600 × 1200 resolution, 16M (24- or 32-bit) colors, and at 
least 75 Hz refresh rate (only 60 Hz at 1400 × 1050). 
ATI Mobility Radeon graphics accelerator with 16-MB (Pentium models) or 8-MB 
(Celeron models) DDR graphics memory, 4x AGP graphics capability. 
Hardware 3D acceleration, hardware DVD acceleration. 
Dual display capability (depends on operating system support). 
Zoomed Video support for lower PC Card slot. 

Power 

Rechargeable lithium-ion battery with LED charge-level gauge (11.1 or 14.8 Vdc). 
Battery life (one battery): up to 4-5 hours typical (varies with model and usage). 
Fast battery recharge: 80% in 1.5 hour, 100% in 2 hours. 
Low-battery warning.  
Suspend/resume capability. 
Universal AC adapter: 100–240 Vac (50/60 Hz) input, 19 Vdc output, 60 W. 
Optional secondary battery available for module bay. 

Mass Storage 

10- to 30-GB removable hard drive with Ultra-DMA 100 interface. 
1.44-MB floppy drive module (for certain models). 
24x CD-ROM, 6x or 8x DVD, or other drive module (or higher). 
Optional drive modules available. 

RAM 

Two slots for PC-133 SDRAM modules. 
Up to 1024 MB RAM maximum. 
At least 128 MB RAM preinstalled. 

Summary of Contents for OmniBook 6100


































































































































































































































Reviews:

No comments

Related manuals for OmniBook 6100

Acer 2480 2779 - TravelMate Guía Del Usuario preview
2480 2779 - TravelMate
Brand: Acer Pages: 97
HP Armada m300 Specifications preview
Armada m300
Brand: HP Pages: 10
HP CHROMEBOOK 11-2201na User Manual preview
CHROMEBOOK 11-2201na
Brand: HP Pages: 24
HP Armada 7400 Appendix preview
Armada 7400
Brand: HP Pages: 6
HP Armada e500 Series Appendix preview
Armada e500 Series
Brand: HP Pages: 2
HP B0N00AA#ABA Brochure preview
B0N00AA#ABA
Brand: HP Pages: 4
HP Armada e500 Series Specifications preview
Armada e500 Series
Brand: HP Pages: 16
HP Chromebook 11 G3 Quickspecs preview
Chromebook 11 G3
Brand: HP Pages: 11
HP Armada 7800 Appendix preview
Armada 7800
Brand: HP Pages: 20
HP Chromebook 11-21 SERIES Maintenance And Service Manual preview
Chromebook 11-21 SERIES
Brand: HP Pages: 57
HP Armada 7400 Software Installation Manual preview
Armada 7400
Brand: HP Pages: 23
HP Chromebook 11 G7 Education Edition Product End-Of-Life Disassembly Instructions preview
Chromebook 11 G7 Education Edition
Brand: HP Pages: 6
HP Chromebook 11 Datasheet preview
Chromebook 11
Brand: HP Pages: 4
HP B2A89UT#ABA Brochure preview
B2A89UT#ABA
Brand: HP Pages: 4
HP Armada m300 Appendix preview
Armada m300
Brand: HP Pages: 6
HP Chromebook 11 G8 Education Edition Maintenance And Service Manual preview
Chromebook 11 G8 Education Edition
Brand: HP Pages: 67
HP Chromebook 11 G6 EE Maintenance And Service Manual preview
Chromebook 11 G6 EE
Brand: HP Pages: 53
HP B0N00AA User Manual preview
B0N00AA
Brand: HP Pages: 85

Brands by name

Popular brands

Load more brands