manualshive.com logo in svg

HP OmniBook 6100, Manual

The HP OmniBook 6100 is a versatile laptop that provides reliable performance for both personal and professional use. For detailed information on using this device effectively, users can access the user manual, available for download, completely free from manualshive.com.

Share
Download
background image

 

Troubleshooting and Maintenance 

 

Troubleshooting Your Computer 

 

 

Corporate Evaluator’s Guide 

159 

Keyboard and Pointing Device Problems 

Use these suggestions for built-in or external devices. 

If the pointer is difficult to control 

• 

Adjust the pointer controls: click Start, Settings, Control Panel, then double-click 
Mouse (Windows 98 or 2000), or click Start, Control Panel, Printers and Other 
Hardware, Mouse (Windows XP).  

If the touch pad or pointing stick doesn’t work 

• 

Don’t move the pointer or touch the touch pad while the computer is rebooting or 
resuming from Standby mode. If this happens, try the following: 

• 

Press a key on the keyboard to restore normal operation. 

• 

Suspend and resume operation using the sleep button. 

• 

If an external mouse is connected, the built-in pointing devices are normally disabled. 
You can change this setting with the BIOS Setup utility—see “To run the BIOS Setup 
utility” on page 177. 

• 

Restart the computer: click Start, Shut Down (or Turn Off Computer), Restart. 

If the touch pad moves the pointer or cursor while you type 

• 

Increase the PalmCheck setting for the touch pad: 

1.  Double-click the touch pad icon in the taskbar. 

–or– 
Click Start, Settings, Control Panel, then double-click Mouse (Windows 98 or 
2000), or click Start, Control Panel, Printers and Other Hardware, Mouse 
(Windows XP). 

2.  Click the TouchPad tab, and select the touch pad device. 

3.  Adjust the PalmCheck slider, and click Apply. 

• 

Disable the touch pad: on the TouchPad tab, select the touch pad device, then select 
Disable and click Apply. 

Summary of Contents for OmniBook 6100


































































































































































































































Reviews:

No comments

Related manuals for OmniBook 6100

Gateway MX6243m Guía De Configuración preview
MX6243m
Brand: Gateway Pages: 2
Gateway MX6211b User Manual preview
MX6211b
Brand: Gateway Pages: 188
Gateway NV-52 Guía De Referencia preview
NV-52
Brand: Gateway Pages: 150
Acer Aspire 5332 Series Service Manual preview
Aspire 5332 Series
Brand: Acer Pages: 230
BenQ Joybook Lite U101 Series User Manual preview
Joybook Lite U101 Series
Brand: BenQ Pages: 67
Acer Aspire 7735ZG Series Quick Manual preview
Aspire 7735ZG Series
Brand: Acer Pages: 13
Acer Aspire 7535 Series Service Manual preview
Aspire 7535 Series
Brand: Acer Pages: 220
Acer Aspire 7551G Quick Manual preview
Aspire 7551G
Brand: Acer Pages: 9
Asus CHROMEBOOK C204EE E-Manual preview
CHROMEBOOK C204EE
Brand: Asus Pages: 94
Asus A8Dc - A1 Hardware User Manual preview
A8Dc - A1
Brand: Asus Pages: 71
Toshiba M6-ST3412 Installation Manual preview
M6-ST3412
Brand: Toshiba Pages: 38
Toshiba Advanced Port Replicator III User Manual preview
Advanced Port Replicator III
Brand: Toshiba Pages: 48
Toshiba Hi-Speed Port Replicator III User Manual preview
Hi-Speed Port Replicator III
Brand: Toshiba Pages: 63
Toshiba A105-S4004 - Satellite - Core Duo 1.66 GHz Specifications preview
A105-S4004 - Satellite - Core Duo 1.66 GHz
Brand: Toshiba Pages: 10
Toshiba A105-S4001 Specifications preview
A105-S4001
Brand: Toshiba Pages: 10
Toshiba A105-S4034 Specifications preview
A105-S4034
Brand: Toshiba Pages: 11
Toshiba A105-S4002 Specifications preview
A105-S4002
Brand: Toshiba Pages: 10
Toshiba A105-S4014 Specifications preview
A105-S4014
Brand: Toshiba Pages: 11

Brands by name

Popular brands

Load more brands