manualshive.com logo in svg

HP Officejet Enterprise Color MFP X585 Flow, User Manual, Page: 148 / 172

Share
Download
HP Officejet Enterprise Color MFP X585 Flow User Manual Download Page 148

NOTE:

These settings are temporary. After you have finished the job, the product returns to the default

settings.

Edge-to-edge copying

Use this feature to avoid shadows that can appear along the edges of copies when the original document is

printed close to the edges.

1.

From the Home screen on the product control panel, scroll to and touch the 

Administration

 button.

2.

Open the following menus:

●

Copy Settings

●

Edge-To-Edge

3.

Select the 

Edge-To-Edge output

 option if the original document is printed close to the paper edges.

4.

Touch the 

Save

 button.

5.

Touch the Start   button.

Clean the pickup rollers and separation pad in the document feeder

Follow these steps if the printed pages have toner smudges or skewed print.

1.

Lift the document-feeder latch.

 

138 Chapter 9   Solve general problems

ENWW

Summary of Contents for Officejet Enterprise Color MFP X585 Flow













































































































































































Reviews:

No comments