![background image](http://html.mh-extra.com/html/hp/jetdirect-640n/jetdirect-640n_administrators-manual_163697052.webp)
NOTE:
To view supported commands, formats, and parameters, type
?
.
To list additional (or advanced) commands, type
advanced
before entering
?
.
To display current configuration information, type
/
.
1.
At the
>
Telnet prompt, type the following and press
Enter
:
<command parameter>: <value>
The
<command parameter>
signifies the configuration parameter, and
<value>
is the value
assigned to that parameter. Follow each command entry with
Enter
(carriage return).
See
Table 3-3 Telnet Commands and Parameters on page 42
for configuration parameters.
2.
Repeat the previous step to set any additional configuration parameters.
3.
When you have finished setting the configuration parameters, type
exit
or
quit
(depending on
your system).
Indicate whether to save any changes by entering
Y
(default) for Yes, or
N
for No.
If you enter
save
instead of
exit
or
quit
, you are not prompted to save settings.
Telnet commands and parameters
.
Table 3-3 Telnet Commands and Parameters on page 42
lists
the available Telnet commands and parameters.
NOTE:
If a parameter is dynamically provided by a BOOTP or DHCP server, you cannot change its
value unless you set Manual configuration. See the
ip-config
command.
When you manually set an IP address, you should also re-set the subnet mask and default gateway.
Table 3-3
Telnet Commands and Parameters
Command
Description
User Control Commands
?
Display the Help and Telnet commands.
/
Display current values.
menu
Display the
Menu Interface on page 59
for use of the configuration parameters.
advanced
Enable advanced commands. Help (
?
) includes the advanced commands in the list.
general
Disable advanced commands. Help (
?
) does not include advanced commands (default).
save
Save the configuration values and exit the session.
exit
Exit the session.
export
Export the settings to a file for editing, and importing through Telnet or TFTP. (Only
available on systems that support input/output redirection, such as UNIX.)
General
42
Chapter 3 TCP/IP configuration
ENWW
Summary of Contents for Jetdirect 640n
