![background image](http://html.mh-extra.com/html/hp/jetdirect-640n/jetdirect-640n_administrators-manual_163697181.webp)
Install TCP/IP software
Use this procedure to verify whether you have TCP/IP installed on a supported Microsoft Windows
system and to install the software, if necessary.
NOTE:
You might need your Microsoft Windows System distribution files or CD-ROMs to install
TCP/IP components.
1.
To check whether you have Microsoft TCP/IP Printing protocol and TCP/IP printing support,
complete the following:
●
Click
Start
,
All Programs
,
Accessories
,
Communications
, and open the
Network
Connections
folder. Double-click the
Local Area Connection
for your network and click
Properties
.
●
If Internet Protocol (TCP/IP) is listed and enabled in the list of components used by this
connection, the necessary software is installed. Proceed to
Configure a network printer for
Microsoft Windows Server 2003/2008 systems on page 171
. Otherwise, continue with step
2.
2.
If you have not previously installed the software:
●
In the
Local Area Connection Properties
window, click
Install
. In the
Select Network
Component Type
window, select
Protocol
and click
Add
to add the
Internet Protocol
(TCP/IP)
.
Follow the on-screen instructions.
3.
Enter TCP/IP configuration values for the computer:
●
On the
General
tab in the
Local Area Connection Properties
window, select
Internet
Protocol (TCP/IP)
and click
Properties
.
If you are configuring a Microsoft Windows server, type the IP address, default gateway address,
and subnet mask in the appropriate spaces.
If you are configuring a client, verify with your network administrator whether to enable automatic
TCP/IP configuration or enter a static IP address, default gateway address, and subnet mask in
the appropriate spaces.
4.
Click
OK
to exit.
5.
If prompted, exit Microsoft Windows and restart your computer for the changes to take effect.
Configure a network printer for Microsoft Windows Server 2003/2008 systems
Set up the default printer by performing the following steps.
1.
Verify that the Print Services for Unix is installed (required for LPR port availability):
a.
Click
Start
,
All Programs
,
Accessories
,
Communications
, and open the
Network
Connections
folder.
b.
Click the
Advanced
menu and then select
Optional Networking Components
.
c.
Select and enable
Other Network File and Print Services
.
ENWW
LPD setup overview 171
Summary of Contents for Jetdirect 640n
