![background image](http://html.mh-extra.com/html/hp/jetdirect-640n/jetdirect-640n_administrators-manual_163697123.webp)
Table 5-6
Manage Custom Services page (continued)
Item
Description
Service Port
For TCP or UDP, select the ports for this custom service to use on the local printer/
MFP, and the remote hosts. The default selection is
Any Port
.
Depending on the service, select
Port Range
or
Specific Port
, then enter the port
range or port in the fields provided.
ICMP Message Type
For ICMPv4 or ICMPv6, enter the ICMP message type number to use by the service.
ICMP does not use ports. Instead, it uses well-known message types.
NOTE:
ICMP messages are typically used for error, control or information
messages between network hosts.
Add
Add the custom service to the
Configured Custom Services
list.
Configured Custom Services
Custom services that were configured.
Delete
Select the service to delete and click
Delete
. You cannot delete a custom service that
is specified for use by an active service template.
Step 3: Specify Action
Select an action for the print server for the addresses and services specified for this rule. Available
actions depend on whether IPsec is supported.
●
Allow traffic. If IPsec is supported, allow traffic to pass without IPsec protection.
●
Drop traffic. Do not process (discard) the specified IP traffic.
●
Require traffic to be protected with an IPsec/Firewall policy. If IPsec/Firewall features are
supported, you are prompted to select or configure an IPsec template to be applied to the
specified IP traffic.
Specify IPsec/Firewall Template
Any prior IPsec templates (for example, for other rules) are listed in the
IPsec/Firewall Templates
field. Because IPsec templates are network dependent, predefined factory default templates are not
supplied.
●
If the list is empty, the
Create IPsec Template
page appears instead, so that you can create a
template.
●
If a desired IPsec template is not in the list, click
New
to create a custom template using the
Create IPsec Template
page.
To view or delete a listed template, select it and click
View
or
Delete
as appropriate.
After an IPsec template is added to the list and selected, click
Next
to complete the rule.
ENWW
HP Jetdirect IPsec/Firewall wizard 113
Summary of Contents for Jetdirect 640n
