![background image](http://html.mh-extra.com/html/hp/jetdirect-640n/jetdirect-640n_administrators-manual_163697155.webp)
Table 8-4
Security Settings
(continued)
Message
Description
IPsec
or
Firewall
If the print server and printer/MFP device supports IPsec, then
IPsec
appears. If
IPsec is not supported, then
Firewall
appears.
Current IPsec/Firewall status.
Enabled
IPsec/Firewall is enabled and operating as configured.
Disabled
IPsec/Firewall is turned off.
Policy Failed
Print server failed to implement the selected IPsec policy. You might
need to reset security (control panel or the HP Embedded Web Server), or perform a
cold reset.
Admin Password
IP Administrator password is set on the print server. This password is shared by
Telnet, the HP Embedded Web Server, and HP Web Jetadmin to control access to
print server configuration parameters. (Consists of up to 16 alphanumeric characters.)
Not Specified
Password not set.
Set
Password is set.
Clear the password, using a cold reset.
Cert Expires
Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in
UTC format (for example, “2012-10-02 12:45 UTC”).
Not Applicable
Digital certificate is not installed.
SNMP Versions
SNMP versions enabled on the print server.
Disabled
All SNMP versions disabled. No SNMP access is allowed.
1;2
SNMP v.1 and SNMP v.2c supported. SNMP v.3 is disabled, or not supported.
1;2;3-na/np
SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum
security of no authentication (na) and no privacy (np).
1;2;3-a/np
SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
of authentication enabled (a) but no privacy (np).
1;2;3-a/p
SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
of authentication (a) with privacy (p) enabled.
3-na/np
SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
of no authentication (na) and no privacy (np).
3-a/np
SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
of authentication enabled (a) but no privacy (np).
3-a/p
SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of
authentication (a) with privacy (p) enabled.
SNMP Set Cmty Name
SNMP set community name is configured on the HP Jetdirect print server. An SNMP
set community name is a password for write access to SNMP control functions
(SNMP SetRequests) on the HP Jetdirect print server.
Not Specified
SNMP set community name is not set.
Specified
User-specified SNMP set community is set.
SNMP Get Cmty Name
SNMP get community name is configured on the HP Jetdirect print server. This is a
password to determine which SNMP GetRequests the HP Jetdirect print server
responds to. If a Get community name is set, the print server responds to either a
user specified community name or the factory-default.
ENWW
HP Jetdirect configuration page 145
Summary of Contents for Jetdirect 640n
