manualshive.com logo in svg

HP Jetdirect 640n, Administrator'S Manual

The HP Jetdirect 640n is a high-performance network card that allows seamless printing and sharing in office environments. For easy management and configuration, make sure to download the free Administrator's Manual from our website, offering step-by-step instructions and valuable insights on maximizing the product's capabilities.

Share
Download
background image

Table 8-8

  

IPv6

 Section (continued)

Message

Description

DHCPV6

IPv6 stateful address configured by a DHCPv6 server.

Not Configured

 Address is not set.

MANUAL

IPv6 address manually configured on the print server, using the printer control panel
or the HP Embedded Web Server.

Not Configured

 Address is not set.

IPX/SPX protocol information

Information in this section of the HP Jetdirect configuration page is described in 

Table 8-9 IPX/SPX

configuration information on page 150

. For error messages, see 

Table 8-13 Error messages

on page 153

.

Table 8-9

  

IPX/SPX

 configuration information

Message

Description

STATUS

Current IPX/SPX protocol status.

READY

 Print server is awaiting data.

DISABLED

 Manually disabled.

INITIALIZING

 Registering the node address or name. An additional status message

might also displayed.

An error code and message is displayed if the print server is not ready. For more
information, see 

Table 8-13 Error messages on page 153

.

PRIMARY FRAME TYPE

Frame type selection.

AUTO SELECT

 Automatically sense and limit to the first one detected.

EN_8023

 Limit to IPX over IEEE 802.3 frames. All others are counted and discarded.

EN_II

 Limit to IPX over Ethernet frames. All others are counted and discarded.

EN_8022

 Limit to IPX over IEEE 802.2 with IEEE 802.3 frames. All others are

counted and discarded.

EN_SNAP

 Limit to IPX over SNAP with IEEE 802.3 frames. All others are counted

and discarded.

NETWORK

FRAME TYPE

RCVD

Network

 column specifies the network number associated with a protocol frame type

used for communication between a server and the HP Jetdirect print server.

UNKNOWN

 Determining which network number to use.

Frame Type

 column identifies the frame type used with the associated network

number: EN_8023, EN_8022, EN_II, EN_SNAP. Unless a specific frame type is
manually set, the print server automatically determines the protocol frame type by
listening to the network data. 

DISABLED

 Frame type for that network is manually

configured.

RCVD

 column displays the packets received for each frame type.

150 Chapter 8   HP Jetdirect configuration pages

ENWW

Summary of Contents for Jetdirect 640n





































































































































































































































Reviews:

No comments

Related manuals for Jetdirect 640n

D-Link DP 301U Quick Installaion Manual preview
DP 301U
Brand: D-Link Pages: 12
Olympus P-10 Instruction preview
P-10
Brand: Olympus Pages: 2
Xerox DocuPrint N24 Supplies Manual preview
DocuPrint N24
Brand: Xerox Pages: 2
Xerox Phaser 4510 Advanced Features Manual preview
Phaser 4510
Brand: Xerox Pages: 80
Xerox Docutech 128 Planning Manual preview
Docutech 128
Brand: Xerox Pages: 38
DataSouth Documax A6300 Series User Manual preview
Documax A6300 Series
Brand: DataSouth Pages: 180
Tektronix Phaser 600 Service Manual preview
Phaser 600
Brand: Tektronix Pages: 286
AstroJet M1DX Operator'S Manual preview
M1DX
Brand: AstroJet Pages: 97
Xerox DocuPrint 4508 User Manual preview
DocuPrint 4508
Brand: Xerox Pages: 150
IBM RS/6000 7043 260 Service Manual preview
RS/6000 7043 260
Brand: IBM Pages: 322
Oki LE810DTUPS Safety Information Manual preview
LE810DTUPS
Brand: Oki Pages: 20
Omneon MediaGrid ContentServer 3000 Quick Reference Manual preview
MediaGrid ContentServer 3000
Brand: Omneon Pages: 2
Blackberry Enterprise Server 33 Reference Manual preview
Enterprise Server 33
Brand: Blackberry Pages: 207
Supermicro SUPERSERVER 5025M-UR User Manual preview
SUPERSERVER 5025M-UR
Brand: Supermicro Pages: 130
Zeiss 5034555 User Manual preview
5034555
Brand: Zeiss Pages: 12
datamax-o'neli E-Class Mark III Operator'S Manual preview
E-Class Mark III
Brand: datamax-o'neli Pages: 58
EXAGATE SYSGuard 3001 Quick Installation Manual preview
SYSGuard 3001
Brand: EXAGATE Pages: 8
HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch User Manual preview
376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch
Brand: HP Pages: 169

Brands by name

Popular brands

Load more brands