![background image](http://html.mh-extra.com/html/hp/jetdirect-640n/jetdirect-640n_administrators-manual_163697146.webp)
My configured channel does not match the configuration page
(Ad hoc mode only) The HP configuration tools allow you to select channel 10 or 11 (default) on the
HP Jetdirect wireless print server. This channel is only used by the print server to broadcast its
network name (SSID) when it fails to detect and join an existing wireless network. If it is able to join a
network, it reconfigures its channel to the one used by the network.
The HP Jetdirect configuration page identifies the network channel actually being used on a network.
It does not show the broadcast channel used when a network is not detected.
Unable to use the HP Jetdirect install network printer wizard
The wizard (Microsoft Windows) is used to configure the HP Jetdirect wireless print server with
wireless network connection settings to access your network.
If you are unable to use this wizard, try other configuration tools, which include:
●
The HP Embedded Web Server (see
HP Embedded Web Server (V.45.xx.nn.xx) on page 63
)
●
Telnet (see
TCP/IP configuration on page 15
)
NOTE:
The configurable parameters available through these optional tools might be limited.
136 Chapter 7 Troubleshoot the HP Jetdirect print server
ENWW
Summary of Contents for Jetdirect 640n
