HP J3128A AdvanceStack 10Base-T Hub-8E, Manual

Page: 52 / 194

4-21
Running the Browser Interface
Running the Bro
w
ser
In
terface
Working With Fault Detection
The Fault Detection Area contains two list boxes that control fault detection
and response policy. The list boxes are:
■
Log Network Problems. Provides sensitivity threshold levels that deter-
mine when a network problem should generate an alert and send it to the
Alert Log.
■
Disable Problem Ports. Provides sensitivity threshold levels that deter-
mine when a network problem is critical enough to direct a port to be
disabled.
The sensitivity levels for both list boxes are:
■
Never
■
Low Sensitivity
■
Medium Sensitivity
■
High Sensitivity
Note that the Disable Port setting cannot have a higher sensitivity than the
one selected in the Log Network Problems list box. The mapping between the
two settings is shown in the following table:
Table 4-5. Recommended Settings
The recommended sensitivity level for Log Network Problems is High Sensi-
tivity. The recommended sensitivity level for Disable Problem Ports is Medium
Sensitivity. The Fault Detection Area settings are described here.
Detection Sensitivity Log Network Problems Setting Disable Problem Ports
Most Automated High Sensitivity High Sensitivity
High Automation High Sensitivity Medium Sensitivity
Medium Automation Medium Sensitivity Medium Sensitivity
Medium Automation Medium Sensitivity Low Sensitivity
Low Automation Low Sensitivity Low Sensitivity
Low Automation Low Sensitivity Never
Manual Never Never
Agent.bk : AGTCH4.FM5 Page 21 Thursday, February 19, 1998 2:13 PM