4.
Close the lever to lock the drive into place.
Installing internal components
Removing the access panel
1.
Lift the access panel latch.
2.
Slide the access panel backwards approximately 2 cm (0.75 in).
3.
Remove the access panel by lifting it straight up and off the server blade.
After the access panel is off, you can do the following:
•
Add an additional processor (
“Processor and heatsink module”
).
•
Add additional memory DIMMs (
“DIMMs”
).
•
Add additional mezzanine cards (
“Mezzanine cards”
).
Installing internal components
43
