HP Integrity BL890c - i2 Server User'S & Service Manual Download Page 41

Page: 41 / 157

5 Optional components

If your server blade has no additional components to install, go to

“Installing and powering on the

server blade” (page 15)

Partner blades

The following partner blades are supported:

•

Ultrium 448c Tape Blade

•

SB920c Tape Blade

•

SB1760c Tape Blade

•

SB3000c Tape Blade

•

SB40c Storage Blade

•

D2200sb Storage Blade

•

IMPORTANT:

In c7000 enclosures, partner blades are supported with BL860c i4 servers and

BL870c i4 servers with BL2E blade links.

In c3000 enclosures, partner blades are supported with BL860c i4 servers.

Partner blades are not supported with BL890c i4 servers.

Partner blade slotting rules are dependent on the conjoined blade configuration. For more
information on partner bay blade locations, see

“Installing the Blade Link for BL870c i2 or BL890c

i2 configurations” (page 22)

NOTE:

SAS tape boot is now supported with tape blades on HP Integrity BL860c i4, BL870 i4,

and BL980 i4 server blades.

NOTE:

PCIe Gen-1 (driven from the ICH10 on the monarch blade’s ICH mezzanine card) provides

the interface to the partner blades. A separate mezzanine pass-thru card is not required.

Partner blades

Summary of Contents for Integrity BL890c - i2 Server






























































































































































Search results

Summary of Contents for Integrity BL890c - i2 Server

Reviews:

Related manuals for Integrity BL890c - i2 Server

Brands by name

Popular brands

HP Integrity BL890c - i2 Server, User'S & Service Manual

Search results

Summary of Contents for Integrity BL890c - i2 Server

Reviews:

Related manuals for Integrity BL890c - i2 Server

Brands by name

Popular brands