HP HP Integrated Lights-Out, User Manual

Page: 70 / 410

70 User Guide Integrated Lights-Out
2. Select Virtual Media in the Virtual Devices tab.
3. Insert the media into the local floppy drive, select a diskette drive, and click
Connect. Alternatively, select a diskette image to be used and click
Connect.
In NetWare 6.5, use the
lfvmount
command on the server console to assign
the device a drive letter.
The NetWare 6.5 operating system will pick the first available drive letter for the
Virtual Floppy drive. The
volumes
command can now be used by the server
console to show the mount status of this new drive.
When the drive letter shows as mounted, the drive will now be accessible
through the server's GUI as well as the system console.
When the Virtual Floppy Drive is mounted, if the media is changed in the local
floppy drive, the
lfvmount
command must be re-issued on the server console
to see the new media in the NetWare 6.5 operating system.
Mounting USB Virtual Media Floppy in Linux
1. Access iLO through a browser.
2. Select Virtual Media in the Virtual Devices tab.
3. Select a diskette drive or diskette image and click Connect.
4. Load the USB drivers, using the following commands:
modprobe usbcore
modprobe usb-storage
modprobe usb-ohci
5. Load the SCSI disk driver, using the following command:
modprobe sd_mod
6. Mount the floppy drive, using the following command:
mount /dev/sda /mnt/floppy –t vfat
NOTE: Use the
man mount
command for additional file system types.