HP HP Integrated Lights-Out, User Manual

Page: 123 / 410

Using iLO 123
Key Sequence
END_KEY \e[4~
PG_UP \e[5~
PG_DOWN \e[6~
•
•
•
Secure Shell
SSH is a telnet-like program for logging into and for executing commands on a
remote machine, which includes security with authentication, encryption, and
data integrity features. iLO can support simultaneous access from two SSH
clients. After SSH is connected and authenticated, the command line interface is
available.
iLO supports:
SSH protocol version 2
PuTTY 0.54, which is a free version of telnet and SSH protocol available for
download on the Internet. When using PuTTY, versions before 0.54 may
display 2 line feeds instead on a single line feed, when the ENTER key is
pressed. To avoid this issue and for best results, HP recommends using
version 0.54 or later.
OpenSSH, which is a free version of the SSH protocol available for
download on the Internet.
When upgrading the firmware to version 1.60, there will be a one-time 25 minute
delay before SSH functionality is available. During this time, iLO generates the
1024 bit RSA and DSA keys. These keys are saved by iLO for future use. If iLO
is reset to factory defaults, the RSA and DSA keys are erased and are regenerated
on the next boot.
Using Secure Shell
Using SSH
To access iLO using SSH: