HP HP Integrated Lights-Out, User Manual

Page: 218 / 410

218 User Guide Integrated Lights-Out
IMPORTANT: Installing directory support for any management
processor requires downloading the HP Smart Component. Refer to the
"Pre-Migration Checklist (on page
206 )" and the "HP Lights-Out
Directory Package" sections for additional information. Extending the
schema must be completed by a Schema Administrator.
To implement directory support on a few management processors.
1. Use Insight Manager 7 or Systems Insight Manager to locate all of the
management processors in the network.
2. Execute the HPQLOMGC utility.
3. Invoke the XML file to migrate the management processor.
HPQLOMGC goes through three phases to complete the migration of a
management processor.
1. The firmware version is validated and updated if necessary.
HPQLOMGC determines the type of management processor and the
firmware level. If the firmware does not meet the minimum requirement
("Upgrading Firmware on Management Processors" on page
210 ),
HPQLOMGC upgrades the firmware and resets the management processor.
After the management processor resets, HPQLOMGC begins the next phase.
2. The management processor directory settings are updated.
HPQLOMGC uses the scripting interface to send the directory settings to the
management processor.
3. The directory is updated.
HPQLOMGC creates a device object in the directory at the location specified
by the user. HPQLOMGC uses either the object name specified in the XML
file or the network name of the management processor. After the device
object is created, the specified role object is then amended to include the
newly created device object.
Launching HPQLOMGC Using Application Launch
Application Launch can be used to create tasks associated with administration of
management processors. For example, the management processors can be
discovered using Application Launch and could be used to automatically
configure new management processors as they are added to the network.