HP HP Integrated Lights-Out, User Manual

Page: 116 / 410

116 User Guide Integrated Lights-Out
The Terminal Services Pass-through service might experience start-up
problems when the operating system Application Event Log is full. To view
the event log, select Computer Management>System Tools>Event
Viewer>Application.
7. Verify that the Terminal Services port assignment is correct. Verify that the
Terminal Services client, mstsc.exe is located in \WINDOWS\SYSTEM32.
If not, reconfigure the pass-through configuration to Enabled and manually
activate the terminal services client.
HP ProLiant Essentials Rapid Deployment Pack
Integration
HP ProLiant Essentials Rapid Deployment Pack integrates with iLO to allow the
management of remote servers and the performance of remote console operations
regardless of the state of the operating system or hardware.
The Deployment Server provides the ability to use the power management
features of iLO to power on, power off, or cycle power on the target server. Each
time a server connects to the Deployment Server, the Deployment Server polls
the target server to see if a LOM management device is installed. If installed, the
server gathers information including the DNS name, IP address, and first user
name. Security is maintained by requiring the user to enter the correct password
for that user name.
For more information about the ProLiant Essentials Rapid Deployment Pack,
refer to the documentation that ships on the ProLiant Essentials Rapid
Deployment Pack CD or the HP website (
http://www.hp.com/servers/rdp ).
Telnet Support
iLO supports the use of telnet to access the iLO command line interface. Telnet
access to iLO supports the CLI, which can invoke a Remote Console connection
as well as a Virtual Serial Port connection. Refer to the "Command Line
Interface (on page
130 )" section for more information.