Remote Insight Command Language
307
DIR_INFO
The DIR_INFO command can only appear within a LOGIN command block.
When the command is parsed, it reads the local directory information database
into memory and prepares to edit it. Only commands that are DIR_INFO type
commands are valid inside the DIR_INFO command block. The DIR_INFO
command generates a response that indicates to the host application whether the
database was successfully read or not. If the database is open for writing by
another application, then this call will fail.
Example:
<DIR_INFO MODE="read">
……… DIR_INFO commands ……
</DIR_INFO>
DIR_INFO Parameters
MODE is a specific string parameter with a maximum length of 10 characters
that specifies what you intend to do with the information. Valid arguments are
"read" and "write."
Write mode enables both reading and writing of directory information. Read
mode prevents modification of directory information.
DIR_INFO Runtime Errors
None
GET_DIR_CONFIG
The GET_DIR_CONFIG command requests the respective iLO directory
settings. For this command to parse correctly, the GET_DIR_CONFIG command
must appear within a DIR_INFO command block, and DIR_INFO MODE can be
set to read or write.
Example:
<RIBCL VERSION="2.0">
Summary of Contents for HP Integrated Lights-Out
