manualshive.com logo in svg

HP HP Integrated Lights-Out, User Manual

Share
Download
HP HP Integrated Lights-Out User Manual Download Page 106

106 

 User Guide Integrated Lights-Out 

 

Server POST Tracking 

Feedback is limited while the server is booting because of the headless nature of 
the ProLiant BL p-Class servers. iLO provides boot-time feedback by flashing 
the Server Health LED green during server POST. The LED is set to solid amber 
if the boot is unsuccessful. The LED is set to solid green at the end of a 
successful boot. 

After a successful boot, control of the Server Health LED is returned to the 
server, which can turn the LED off or set it to some other color to represent the 
health of the server hardware. 

 

Insufficient Power Notification 

iLO turns the Server Health LED solid red if iLO cannot power on the server 
because insufficient power is in the rack infrastructure. 

 

Hot-Plug Keyboard 

Hot-plug keyboard functionality was implemented for all servers with iLO. The 
hot-plug keyboard feature supports connecting a local keyboard to the server 
while the server is in a powered-on state. It is not necessary to power cycle the 
server to get local keyboard functionality after hot-plugging a keyboard. If a 
keyboard is connected to the server after the operating system has booted, the 
hot-plugged keyboard is fully functional. The keyboard can be hot-plugged 
multiple times after the operating system has booted. 

 

Keyboard Definitions 

• 

• 

• 

• 

Local keyboard—A keyboard physically connected to the PS2 connector on 
the server. 

Remote Console keyboard—The keyboard used during a Remote Console 
session. 

Hot-plug keyboard functionality—A fully-functioning local keyboard after 
hot-plugging it to a server. 

Hot-plugging a keyboard—Connecting a local keyboard to the keyboard PS2 
connector on the server while the server is in a powered-on state. 

 

Summary of Contents for HP Integrated Lights-Out



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands