HP EVA P6000, User Manual

Page: 223 / 298

Displays SCSI initiator information: iSCSI or FC. See
the
“show initiators command” (page 226)
initiators [fc or iscsi]
Displays initiators and the LUNs to which they are
mapped. See the
“show initiators LUN mask
command” (page 228)
initiators_lunmask
Displays iSCSI port information and configuration. See
the
“show iSCSI command” (page 229)
iscsi [port_num]
Displays the module’s iSCSI name server (iSNS)
configuration.
“show iSNS command” (page 231)
isns [port_num]
Displays the module’s logging information. See the
“show logs command” (page 231)
logs
Displays complete LUN information for a specified
target and LUN. See the
“show LUNinfo
command” (page 232)
luninfo
Displays LUN information and their targets. See the
“show LUNs command” (page 233)
luns
Sets system parameters such as symbolic name and log
level. See the
“show system command” (page 243)
system
Displays LUN mappings. See the “show lunmask
command” (page 234)
lunmask
Displays memory usage. See the “show memory
command” (page 234)
memory
Displays the module’s management port (10/100)
configuration. See the
“show mgmt
command” (page 235)
mgmt
Displays the module’s network time protocol (NTP)
configuration. See the
“show NTP command” (page 235)
ntp
Displays module's performance. See the “show perf
command” (page 236)
perf [ byte | init_rbyte |
init_wbyte | tgt_rbyte | tgt_wbyte
]
Displays targets presented by the module: FC, iSCSI,
or both. See the
“show presented targets
command” (page 237)
presented_targets [fc or iscsi]
Displays module properties. See the “show properties
command” (page 240)
properties
Displays the module’s simple network management
protocol (SNMP) properties and trap configurations.
See the
“show SNMP command” (page 241)
snmp
Displays the module statistics, both FC and iSCSI. See
the
“show stats command” (page 241)
stats
Displays module product information including serial
number, software version, hardware version,
system
configuration, and temperature. See the “show system
command” (page 243)
Displays targets discovered by the module: FC, iSCSI,
or both. See the
“show targets command” (page 244)
targets [fc or iscsi]
Displays virtual port groups. See the “show VPGroups
command” (page 244)
vpgroups [vpgroup index]
Commands 223