HP EVA P6000, User Manual

Page: 166 / 298

Table 23 Error Messages (continued)
How to correct Meaning Status code value
Configure the virtual disk to be a
member of a Continuous Access group
and retry the request. The operation cannot be performed because
the virtual disk is not a member of a
Continuous Access group. 45
Not DR group member
Configure the Continuous Access
group correctly and retry the request. The operation cannot be performed because
the Continuous Access group is not in the
required mode. 46
Invalid DR mode
Wait for the copying state to complete
and retry the request. The operation cannot be performed because
at least one of the virtual disk members is in
a copying state. 47
The target DR member is in full
copy, operation rejected
Use the management software to save
the password specified so
communication can proceed. The management software is unable to log
in to the storage system. The storage system
password has been configured. 48
Security credentials needed.
Please update your system's ID
and password in the Storage
System Access menu.
Use the management software to set
the password to match the device so
communication can proceed. The management software is unable to login
to the device. The storage system password
may have been re-configured or removed. 49
Security credentials supplied
were invalid. Please update your
system's ID and password in the
Storage System Access menu.
No action required. The management software is already logged
in to the device. (This message is
informational only.) 50
Security credentials supplied
were invalid. Please update your
system's ID and password in the
Storage System Access menu.
Verify that devices are powered on
and that device hardware connections The Continuous Access group is unable
communicate to the remote site. 51
Storage system connection down
are functioning correctly. In particular,
validate that the inter-site link is
functioning correctly.
Add one or more virtual disks as
members and retry the request. No virtual disks are members of the
Continuous Access group. 52
DR group empty
Retry the request with valid attributes
for the operation. Currently, this error The request cannot be performed because
one or more of the attributes specified is
incompatible. 53
Incompatible attribute
code is only used for mirror clone
operations, and is returned when a
fracture or invert is requested and all
operations are not alike.
Remove the virtual disk as a member
of a data replication group and retry
the request. The requested operation cannot be
performed on a virtual disk that is already
a member of a data replication group. 54
Vdisk is a DR group member
No action required. The requested operation cannot be
performed on a virtual disk that is a log unit. 55
Vdisk is a DR log unit
Report the error to product support. The battery system is missing or discharged. 56
Cache batteries failed or missing.
The virtual disk member must be
presented to a client before this
operation can be performed. The virtual disk member is not presented to
a client. 57
Vdisk is not presented
Retry the operation once controller
failout is complete. The other controller failed during the
execution of this operation. 58
Other controller failed
166 Error messages