3.
For iSNS discovery:
a.
Select
Initiator
and then enter the iSNS name or IP address in the
iSNS Address
field
(
Figure 38 (page 95)
).
Figure 38 iSNS discovery and verification
b.
Test the connection from the initiator to the iSNS server by selecting
Verify iSNS
. If
successful, select
Save
.
If necessary, working on the iSNS server, make the appropriate edits to add the Xtend
SAN iSCSI Initiator to any iSNS discovery domains that include iSCSI module targets.
c.
Select
Discover Targets
.
d.
Select
Discover by iSNS
.
A list of module targets appears under
Discovered Targets
(
Figure 36 (page 94)
).
NOTE:
The module's port may present several iSCSI targets to the Xtend SAN iSCSI
Initiator. Select only one target from the list.
e.
Select the newly-added target under Host name in the left frame.
f.
Check the
Visible
box (
Figure 39 (page 95)
). This allows the initiator to display the target
status.
g.
Check the
Auto Login
box. This configures the iSCSI Initiator to automatically log in to
the iSCSI target at system startup.
h.
Click
Save
.
Figure 39 Selecting newly added target
Set up the iSCSI Initiator
95
Summary of Contents for EVA P6000
Page 187: ...German laser notice Italian laser notice Japanese laser notice Laser compliance notices 187 ...
Page 193: ...German battery notice Italian battery notice Battery replacement notices 193 ...
Page 194: ...Japanese battery notice Spanish battery notice 194 Regulatory compliance notices ...
