INSTRUCTIONS FOR:
GALVANIZED STEEL SHED
GREEN
1.5 x 0.8 x 1.9m
MODEL NO:
GSS1508G
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep children and unauthorised persons away from the working area.
DO NOT
use the shed for any purpose other than that for which it is designed.
Use appropriate safety clothing including eye protection.
NOTE:
The assembly of this product will require assistance.
DO NOT
attempt assembly in windy conditions
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
4. CONCRETE SLAB
Galvanized, steel panels easily assembled to form a rigid and secure shed. Has skillion (sloping) roofs and single doors. Doors are secured by
cross bolt and eyelet which will accept a padlock (not included) for additional security. All models are supplied with bolt-down fixing kits.
Model No:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSS1508G
Overall Size (W x D X H*):
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1500 x 800 x 1900mm
Roof Type:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Skillion
*Minimum Wall Height.
Concrete slab: Ensure that your site is level. It is recommended that your slab is 100mm thick and you use builders plastic and F52 reinforcing
mesh. We recommend that you make your slab 100mm bigger than the base dimensions of your shed. This will allow for a 50mm edge around your
shed. We recommend that you slope the 50mm edges downward by 10 mm so that rain water can be drained away from your shed.
Original Language Version
© Jack Sealey Limited
GSS1508G Issue: 1 - 28/08/14
