HP ENVY m6-1100 Maintenance And Service Manual Download

Page: 20 / 134

Item

Component

Description

(3)

HP TrueVision HD webcam

Records video, captures still photographs, and allows
video conferences and online chat by means of
streaming video.

To use the webcam, select

Start > All Programs >

Communication and Chat > CyberLink YouCam

(4)

WLAN antennas (2)*

Send and receive wireless signals to communicate
with WLANs.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around
the antennas free from obstructions. For wireless regulatory notices, see the section of the

Regulatory, Safety, and

Environmental Notices

that applies to your country or region. These notices are located in Help and Support.

Chapter 2 External component identification

ENWW

Summary of Contents for ENVY m6-1100







































































































































Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands

HP ENVY m6-1100, Maintenance And Service Manual

Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands