HP ENVY m6-1100 Maintenance And Service Manual Download

Page: 23 / 134

Lights

Item

Component

Description

(1)

Power light

●

White: The computer is on.

●

Blinking white: The computer is in the Sleep state,
which is an energy-saving mode. The computer
shuts off power to the display and other
unneeded components.

●

Off: The computer is off or in Hibernation.
Hibernation is an energy-saving mode that uses the
least amount of power.

NOTE:

For select models, the Intel Rapid Start

Technology feature is enabled at the factory. Rapid
Start Technology allows your computer to resume
quickly from inactivity.

(2)

Caps lock light

On: Caps lock is on, which switches the keys to all
capital letters.

(3)

Mute light

●

Amber: Computer sound is off.

●

Off: Computer sound is on.

(4)

Wireless light

●

White: An integrated wireless device, such as a
WLAN device and/or a Bluetooth device, is on.

●

Amber: All wireless devices are off.

ENWW

Lights

Summary of Contents for ENVY m6-1100







































































































































Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands

HP ENVY m6-1100, Maintenance And Service Manual

Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands