HP ENVY m6-1100 Maintenance And Service Manual Download

Page: 57 / 134

Item

Component

Description

(4)

Warranty period

This number describes the duration of the warranty
period for the computer.

(5)

Model description

This is the alphanumeric identifier used to locate
documents, drivers, and support for the computer.

Battery

Description

Spare part number

9-cell, 100-Wh, 3.0-Ah, Li-ion battery

672412-001

6-cell, 62-Wh, 2.8-Ah, Li-ion battery

671731-001

Before disassembling the computer, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery:

Turn the computer upside down on a flat surface.

Slide the battery release latch

(1)

to release the battery.

Pivot the front edge of the battery

(2)

up and back.

Remove the battery

(3)

from the computer.

ENWW

Component replacement procedures

Summary of Contents for ENVY m6-1100







































































































































Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands

HP ENVY m6-1100, Maintenance And Service Manual

Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands