HP ENVY m6-1100 Page 110 Maintenance And Service Manual Download | Manualshive

Page: 110 / 134

background image

Downloading a BIOS update

CAUTION:

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation,

download and install a BIOS update only when the computer is connected to reliable external power
using the AC adapter. Do not download or install a BIOS update while the computer is running on
battery power, docked in an optional docking device, or connected to an optional power source.
During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1.

From the Start screen, select the

HP Support Assistant

app.

2.

Select

Updates and tune-ups

, and then select

Check for HP updates now

.

3.

Follow the on-screen instructions.

4.

At the download area, follow these steps:

a.

Identify the most recent BIOS update and compare it to the BIOS version currently installed on
your computer. Make a note of the date, name, or other identifier. You may need this
information to locate the update later, after it has been downloaded to your hard drive.

b.

Follow the on-screen instructions to download your selection to the hard drive.

Make a note of the path to the location on your hard drive where the BIOS update is
downloaded. You will need to access this path when you are ready to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the
download is complete. If no instructions are displayed, follow these steps:

1.

From the Start screen, type

e

, and then select

File Explorer

.

2.

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3.

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains
the update.

4.

Double-click the file that has an .exe extension (for example,

filename.exe

).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

102

Chapter 5 Using Setup Utility (BIOS) and System Diagnostics

ENWW

«
...
108
109
110
111
112
...
»

Summary of Contents for ENVY m6-1100







































































































































Reviews:

No comments

Related manuals for ENVY m6-1100

Brand: Hamax Pages: 74

Brand: Panasonic Pages: 80

Brand: Panasonic Pages: 2

Micropulse BTL5 Series

Brand: Balluff Pages: 16

Brand: Caberg Pages: 3

Brand: Caberg Pages: 2

CSL Elite Racing Wheel

Brand: FANATEC Pages: 2

Brand: FANATEC Pages: 8

Brand: FANATEC Pages: 35

Brand: Federal Signal Corporation Pages: 8

Brand: Federal Signal Corporation Pages: 8

Brand: Nautronic Pages: 7

Brand: NAPCO Pages: 16

Brand: Tascam Pages: 4

Brand: Tascam Pages: 2

Brand: Tascam Pages: 4

Brand: Tascam Pages: 32

Brand: Tascam Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands