HP ENVY m6-1100 Page 82 Maintenance And Service Manual Download

Page: 82 / 134

TouchPad button board

Description

Spare part number

TouchPad button board (includes TouchPad button board cable and TouchPad cable)

686919-001

Before removing the TouchPad button board, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see

Battery on page 49

), and then remove the following components:

Hard drive (see

Hard drive on page 50

)

Optical drive (see

Optical drive on page 54

)

Keyboard (see

Keyboard on page 58

)

Top cover (see

Top cover on page 67

)

Remove the TouchPad button board:

Turn the top cover upside down, with the front toward you.

Release the ZIF connector to which the TouchPad board cable is attached, and then disconnect the
TouchPad board cable

(1)

from the TouchPad board.

Remove the Phillips PM2.5×3.5 screw

(2)

that secures the TouchPad button board to the

top cover.

Chapter 4 Removal and replacement procedures

ENWW

Summary of Contents for ENVY m6-1100







































































































































Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands

HP ENVY m6-1100, Maintenance And Service Manual

Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands