HP ENVY m6-1100 Maintenance And Service Manual Download

Page: 26 / 134

Left side

Item

Component

Description

(1)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.

(2)

External monitor port

Connects an external VGA monitor or projector.

(3)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or
audio device.

(4)

RJ-45 (network) jack

Connects a network cable.

(5)

RJ-45 (network) jack lights

●

White (top): The network is connected.

●

Amber (bottom): Activity is occurring on
the network.

(6)

USB 3.0 ports (2)

Connect an optional USB 3.0 device and provide
enhanced USB power performance.

NOTE:

For details about different types of USB ports,

see the

HP Notebook Reference Guide

(7)

Audio-out (headphone) jack/ Audio-in
(microphone) jack

Produces sound when connected to optional powered
stereo speakers, headphones, earbuds, a headset, or
television audio. Also connects an optional
headset microphone.

NOTE:

This jack does not support optional microphone-

only devices.

WARNING!

To reduce the risk of personal injury,

adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the

Regulatory, Safety, and

Environmental Notices

NOTE:

When a device is connected to the jack,

the computer speakers are disabled.

Chapter 2 External component identification

ENWW

Summary of Contents for ENVY m6-1100







































































































































Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands

HP ENVY m6-1100, Maintenance And Service Manual

Search results

Summary of Contents for ENVY m6-1100

Reviews:

Related manuals for ENVY m6-1100

Brands by name

Popular brands