2.
Lift the processor
(2)
straight up, and remove it.
NOTE:
The gold triangle
(3)
on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Optical drive connector board
Description
Spare part number
Optical drive connector board (includes cable)
686899-001
Before removing the optical drive connector board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 49
), and then remove the following components:
a.
Hard drive (see
Hard drive on page 50
)
b.
Optical drive (see
Optical drive on page 54
)
c.
Keyboard (see
Keyboard on page 58
)
d.
Top cover (see
Top cover on page 67
)
ENWW
Component replacement procedures
85
Summary of Contents for ENVY m6-1100
