Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
5.
If the computer is on a stand, remove the computer from the stand.
6.
Remove the access panel and front bezel.
7.
Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 7-3
Retrieving the Front Bezel Security Screw
8.
Replace the front bezel.
102
Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Summary of Contents for Compaq Pro 6305
Page 4: ...iv About This Book ...
