7.
Slide the power supply toward the front of the computer
(2)
, rotate toward the fan so the power
supply clears the lip on the top of the chassis, and then lift the power supply out of the chassis
(3)
.
Figure 6-45
Removing the power supply
To install the power supply, reverse the removal procedure.
System Board
Description
Spare part number
System board for use in Windows 7 models (includes thermal material)
703596-001
System board for use in Windows 8 Standard models
703596-501
System board for use in Windows 8 Professional models
703596-601
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 54
).
2.
Remove the access panel (
Computer Access Panel on page 55
).
3.
Remove the front fan assembly (
Front Fan Assembly on page 85
).
4.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules (
Memory on page 60
)
●
Expansion cards (
Expansion Cards on page 64
)
●
Heat sink (
Heat sink on page 89
).
96
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Summary of Contents for Compaq Pro 6305
Page 4: ...iv About This Book ...
