●
Processor (
Processor on page 90
)
●
WLAN module (
WLAN module on page 67
)
5.
Disconnect all cables connected to the system board, noting their location for reinstallation.
6.
Remove the eight Torx T15 screws that secure the system board to the chassis.
Figure 6-46
System board screws
7.
Slide the system board toward the front of the computer to disengage the I/O panel, lift the rear of
the system board up at an angle, and then lift the system board out of the computer.
Figure 6-47
Removing the system board
System Board
97
Summary of Contents for Compaq Pro 6305
Page 4: ...iv About This Book ...
