Speaker
Description
Spare part number
Speaker
636925-001
The speaker is attached to the front of the chassis under the rotating drive cage.
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 99
).
2.
Remove the access panel (
Access Panel on page 100
).
3.
Remove the front bezel (
Front Bezel on page 101
).
4.
Rotate the drive cage to its upright position.
5.
Disconnect the speaker wire from the white system board labeled SPKR
(1)
.
6.
Remove the Torx screw that secures the speaker to the chassis
(2)
.
7.
Lift the speaker from the inside of the chassis to remove it
(3)
.
Figure 7-43
Removing the speaker
To install the speaker, reverse the removal procedures.
138
Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Summary of Contents for Compaq Pro 6305
Page 4: ...iv About This Book ...
