manualshive.com logo in svg

HP Compaq Pro 6305, Maintenance And Service Manual

The HP Compaq Pro 6305 Maintenance And Service Manual is a comprehensive guide for users seeking to troubleshoot and maintain their device independently. This detailed manual can be downloaded for free from our website, providing step-by-step instructions on how to optimize your product's performance and ensure longevity.

Share
Download
background image

Table 3-4

  Computer Setup—Security (continued)

DriveLock Security

Allows you to assign or modify a master or user password for hard drives. When this feature is
enabled, the user is prompted to provide one of the DriveLock passwords during POST. If neither is
successfully entered, the hard drive will remain inaccessible until one of the passwords is
successfully provided during a subsequent cold-boot sequence.

NOTE:

This selection will only appear when at least one drive that supports the DriveLock feature

is attached to the system.

Secure Boot
Configuration

This is a feature of Windows 8.

●

Legacy Support—Enable/Disable. Allows you to turn off all legacy support on the computer,
including booting to DOS, running legacy graphics cards, booting to legacy devices, and so
on. If set to disable, legacy boot options in 

Storage > Boot Order

 are not displayed.

Default is enabled.

●

Secure Boot—Enable/Disable. Allows you to make sure an operating system is legitimate
before booting to it, making Windows resistant to malicious modification from preboot to full
OS booting, preventing firmware attacks. UEFI and Windows Secure Boot only allow code
signed by pre-approved digital certificates to run during the firmware and OS boot process.
Default is disabled, except for Windows 8 systems which have this setting enabled. Secure
Boot enabled also sets 

Legacy Support 

to disabled.

●

Key Management—This option lets you manage the custom key settings.

◦

Clear Secure Boot Keys—Don't Clear/Clear. Allows you to delete any previously loaded
custom boot keys. Default is Don't Clear.

◦

Key Ownership—HP Keys/Custom Keys. Selecting Custom Mode allows you to modify
the contents of the secure boot signature databases and the platform key (PK) that verifies
kernels during system start up, allowing you to use alternative operating systems.
Selecting HP Keys causes the computer boot using the preloaded HP-specific boot keys.
Default is HP Keys.

●

Fast Boot—Enable/Disable. Fast boot disables the ability to interrupt boot, such as pressing f
keys to access items before the operating system loads. Default is disabled.

NOTE:

If Windows 8 detects a serious error, it will interrupt the boot process automatically

and display advanced boot options.

From Windows 8, you can press 

Shift

 and select 

Restart

 to access the screen that lets you

boot to a device or troubleshoot your computer.

20

Chapter 3   Computer Setup (F10) Utility

Summary of Contents for Compaq Pro 6305









































































































































































































































Reviews:

No comments

Related manuals for Compaq Pro 6305

C-Media CM 6206 Software User Manual preview
CM 6206
Brand: C-Media Pages: 33
Fastcom 232/8-ISA Hardware Reference Manual preview
232/8-ISA
Brand: Fastcom Pages: 26
FastVDO SMARTCAPTURE User Manual preview
SMARTCAPTURE
Brand: FastVDO Pages: 16
S&T Kontron COMe-bTL6 User Manual preview
Kontron COMe-bTL6
Brand: S&T Pages: 101
Digital Equipment EtherWORKS Turbo PCI User Information preview
EtherWORKS Turbo PCI
Brand: Digital Equipment Pages: 48
Datavideo CAP-1 Instruction Manual preview
CAP-1
Brand: Datavideo Pages: 48
Kvaser 73-30130-01029-1 User Manual preview
73-30130-01029-1
Brand: Kvaser Pages: 17
Lava LAVA SSerial-PCIe Datasheet preview
LAVA SSerial-PCIe
Brand: Lava Pages: 1
Hama Traveldrive 1000&1 Quick Reference preview
Traveldrive 1000&1
Brand: Hama Pages: 22
Philips Rhythmic Edge PSC702 Technical Specifications preview
Rhythmic Edge PSC702
Brand: Philips Pages: 2
Philips PSC705B Specifications preview
PSC705B
Brand: Philips Pages: 2
Philips PSC724 Ultimate Edge Specifications preview
PSC724 Ultimate Edge
Brand: Philips Pages: 2
Philips PSC70517 Specifications preview
PSC70517
Brand: Philips Pages: 2
Philips PSC 605 Specifications preview
PSC 605
Brand: Philips Pages: 2
Philips Avenger SAA7785 Declaration Of Conformity preview
Avenger SAA7785
Brand: Philips Pages: 1
Philips Dynamic Edge 4.1 Specifications preview
Dynamic Edge 4.1
Brand: Philips Pages: 2
Philips Acoustic Edge PSC706 Technical Specifications preview
Acoustic Edge PSC706
Brand: Philips Pages: 2
Philips Dynamic Edge 4.1 Release Note preview
Dynamic Edge 4.1
Brand: Philips Pages: 9

Brands by name

Popular brands

Load more brands