5.
Lift the heat sink from atop the processor.
When reinstalling the heat sink, make sure that its bottom has been cleaned with an alcohol wipe and
fresh thermal grease has been applied to the top of the processor.
CAUTION:
Heat sink retaining screws should be tightened in diagonally opposite pairs (as in an X)
to evenly seat the heat sink on the processor. This is especially important as the pins on the socket are
very fragile and any damage to them may require replacing the system board.
Processor
Description
Spare part number
AMD A10-5800B, 3.8 GHz, 4-MB L2 cache (100-W), HD 7660D
703598-001
AMD A8-5500B, 3.2 GHz, 4-MB L2 cache (65-W), HD 7560D
703601-001
AMD A6-5400B, 3.6 GHz, 4-MB L2 cache (65-W), HD 7540D
703600-001
AMD A4-5300B, 3.4 GHz, 4-MB L2 cache (65-W), HD 7480D
703599-001
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 54
).
2.
Remove the access panel (
Computer Access Panel on page 55
).
3.
Remove the heat sink (
Heat sink on page 89
).
4.
Rotate the locking lever to its full open position
(1)
.
90
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Summary of Contents for Compaq Pro 6305
Page 4: ...iv About This Book ...
