HP Compaq NX9600 Hardware And Software Manual Download

Page: 30 / 199

2–2

Hardware and Software Guide

Keyboard

TouchPad

Identifying TouchPad Components

Component

Description

TouchPad light

On: TouchPad is enabled.

TouchPad*

Moves the pointer and selects or
activates items on the screen.

Left and right TouchPad
buttons (2)*

Function like the left and right buttons
on an external mouse.

TouchPad left/right scroll
zone*

Scrolls left or right.

TouchPad up/down scroll
zone*

Scrolls up or down.

TouchPad button

Enables/disables the TouchPad.

*This table describes default settings. For information about changing the
functions of TouchPad features, see the

“Setting TouchPad Preferences”

section, later in this chapter.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands