HP Compaq NX9600 Hardware And Software Manual Download

Page: 39 / 199

Keyboard

Hardware and Software Guide

2–11

Play, Pause or Resume an Audio CD or DVD
(fn+f9)

The

fn+f9

hotkey functions only when an audio CD or DVD is

inserted. If the audio CD or DVD is

■

Not playing, press the

fn+f9

hotkey to begin or resume

the play of the disc.

■

Playing, press the

fn+f9

hotkey to pause the play of the disc.

Stop an Audio CD or DVD (fn+f10)

The

fn+f10

hotkey stops the play of an audio CD or DVD.

Play Previous Track of an Audio CD or DVD
(fn+f11)

The

fn+f11

hotkey plays the previously played track of an audio

CD or DVD that is playing.

Play Next Track of an Audio CD or DVD (fn+f12)

The

fn+f12

hotkey plays the next track of an audio CD or DVD

that is playing.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands