Security
Hardware and Software Guide
5–11
3. Open the Setup utility by turning on or restarting the
notebook. Press
f10
while Setup message is displayed in the
lower-left corner of the screen.
4. Use the arrow keys to select
Security > Power-On
password,
and then press
enter.
❏
To set a power-on password, type the password in the
Enter New Password
and
Confirm New Password
fields, and then press
enter.
❏
To change a power-on password, type the current
password in the
Enter Current Password
field, type the
new password in the
Enter New Password
and
Confirm
New Password
fields, and then press
enter.
❏
To delete a power-on password, type the current password
in the Enter Current Password field, press
enter
3 times,
and then press
f10.
5. To save your preferences and exit the Setup utility, press
f10,
and then follow the instructions on the screen.
Your preferences are set when you exit the Setup utility and take
effect when the notebook restarts.
Entering Power-On Passwords
At the power-on password prompt, type your password, and then
press
enter.
After 3 unsuccessful attempts to enter the password,
you must restart the notebook and try again.
