9–14
Hardware and Software Guide
Software Updates, Restorations and Utilities
Opening the Setup Utility
To access most settings:
1. Start up or restart the notebook.
2. Before Windows opens and while the “Press <F10> to enter
setup” prompt is displayed in the lower left corner of the
screen, press
f10.
On select models only, you must start up (not restart) the
notebook to access the settings for a hard drive password.
Navigating and Selecting in the Setup Utility
Because the Setup utility is not based on Windows, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To navigate, use the up and down arrow keys or
tab.
■
To select an item, use the arrow keys to select the item, and
then press
enter.
■
To close a display but remain in the Setup utility, press
esc.
