HP Compaq NX9600 Hardware And Software Manual Download

Page: 131 / 199

7–2

Hardware and Software Guide

Drives

All models have a digital drive bay that can be used with an
optional HP USB Digital Drive. For more information, see the

“HP USB Digital Drive (Select Models Only)”

section, later in

this chapter.

An optional external drive can be added to the system by
connecting it to one of the USB (Universal Serial Bus) or
1394 ports on the notebook.

Additional data storage can be added with digital cards including
SD Memory Cards, MultiMediaCards, Smart Media, xD-Picture
Card, Memory Sticks, and Memory Stick Pro. For more
information, refer to

“Using Digital Cards,”

Chapter 6.

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands