HP Compaq NX9600 Hardware And Software Manual Download

Page: 113 / 199

6–8

Hardware and Software Guide

Hardware Options and Upgrades

Stopping and Removing a PC Card

CAUTION:

To prevent loss of work or an unresponsive system, stop the

PC Card before removing it.

✎

Stopping a PC Card, even if it is not in use, conserves power.

1. Close all applications and complete all activities that are

supported by the PC Card.

2. To stop a PC Card, select the

Safely Remove Hardware

icon

on the taskbar, and then select the PC Card. (To display the
Safely Remove Hardware icon on the taskbar, click the arrow
icon for Show Hidden Icons.)

3. To release the PC Card, press the PC Card eject button

extend the button, and then press the button again to release
the PC Card.

4. Gently pull out the PC Card

Summary of Contents for Compaq NX9600








































































































































































































Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands

HP Compaq NX9600, Hardware And Software Manual

Search results

Summary of Contents for Compaq NX9600

Reviews:

Related manuals for Compaq NX9600

Brands by name

Popular brands